/*
 * Copyright (c) 1997, 2026, Oracle and/or its affiliates. All rights reserved.
 * Copyright (c) 2014, 2020, Red Hat Inc. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 *
 */

#include "asm/macroAssembler.hpp"
#include "code/codeCache.hpp"
#include "code/compiledIC.hpp"
#include "gc/shared/collectedHeap.hpp"
#include "nativeInst_aarch64.hpp"
#include "oops/oop.inline.hpp"
#include "runtime/handles.hpp"
#include "runtime/orderAccess.hpp"
#include "runtime/sharedRuntime.hpp"
#include "runtime/stubRoutines.hpp"
#include "utilities/ostream.hpp"
#ifdef COMPILER1
#include "c1/c1_Runtime1.hpp"
#endif
#if INCLUDE_JVMCI
#include "jvmci/jvmciEnv.hpp"
#endif

void NativeCall::verify() {
  assert(NativeCall::is_call_at((address)this), "unexpected code at call site");
}

void NativeInstruction::wrote(int offset) {
  ICache::invalidate_word(addr_at(offset));
}

address NativeCall::destination() const {
  address addr = instruction_address();
  address destination = addr + displacement();

  // Performance optimization: no need to call find_blob() if it is a self-call
  if (destination == addr) {
    return destination;
  }

  // Do we use a trampoline stub for this call?
  CodeBlob* cb = CodeCache::find_blob(addr);
  assert(cb != nullptr && cb->is_nmethod(), "nmethod expected");
  nmethod *nm = cb->as_nmethod();
  if (nm->stub_contains(destination) && is_NativeCallTrampolineStub_at(destination)) {
    // Yes we do, so get the destination from the trampoline stub.
    const address trampoline_stub_addr = destination;
    destination = nativeCallTrampolineStub_at(trampoline_stub_addr)->destination();
  }

  return destination;
}

// Similar to replace_mt_safe, but just changes the destination. The
// important thing is that free-running threads are able to execute this
// call instruction at all times.
//
// Used in the runtime linkage of calls; see class CompiledIC.
void NativeCall::set_destination_mt_safe(address dest) {
  assert((CodeCache_lock->is_locked() || SafepointSynchronize::is_at_safepoint()) ||
         CompiledICLocker::is_safe(addr_at(0)),
         "concurrent code patching");

  address addr_call = addr_at(0);
  bool reachable = Assembler::reachable_from_branch_at(addr_call, dest);
  assert(NativeCall::is_call_at(addr_call), "unexpected code at call site");

  // Patch the constant in the call's trampoline stub.
  address trampoline_stub_addr = get_trampoline();
  if (trampoline_stub_addr != nullptr) {
    assert (! is_NativeCallTrampolineStub_at(dest), "chained trampolines");
    nativeCallTrampolineStub_at(trampoline_stub_addr)->set_destination(dest);
  }

  // Patch the call.
  if (reachable) {
    set_destination(dest);
  } else {
    assert (trampoline_stub_addr != nullptr, "we need a trampoline");
    set_destination(trampoline_stub_addr);
  }

  ICache::invalidate_range(addr_call, instruction_size);
}

address NativeCall::get_trampoline() {
  address call_addr = instruction_address();

  CodeBlob *code = CodeCache::find_blob(call_addr);
  assert(code != nullptr && code->is_nmethod(), "nmethod expected");
  nmethod* nm = code->as_nmethod();

  address bl_destination = call_addr + displacement();
  if (nm->stub_contains(bl_destination) &&
      is_NativeCallTrampolineStub_at(bl_destination))
    return bl_destination;

  return trampoline_stub_Relocation::get_trampoline_for(call_addr, nm);
}

// Inserts a native call instruction at a given pc
void NativeCall::insert(address code_pos, address entry) { Unimplemented(); }

//-------------------------------------------------------------------

void NativeMovConstReg::verify() {
  if (! (nativeInstruction_at(instruction_address())->is_movz() ||
        is_adrp_at(instruction_address()) ||
        is_ldr_literal_at(instruction_address())) ) {
    fatal("should be MOVZ or ADRP or LDR (literal)");
  }
}


intptr_t NativeMovConstReg::data() const {
  address addr = MacroAssembler::target_addr_for_insn(instruction_address());
  if (maybe_cpool_ref(instruction_address())) {
    return *(intptr_t*)addr;
  } else {
    return (intptr_t)addr;
  }
}

void NativeMovConstReg::set_data(intptr_t x) {
  if (maybe_cpool_ref(instruction_address())) {
    MACOS_AARCH64_ONLY(os::thread_wx_enable_write());
    address addr = MacroAssembler::target_addr_for_insn(instruction_address());
    *(intptr_t*)addr = x;
  } else {
    // Store x into the instruction stream.
    MacroAssembler::pd_patch_instruction(instruction_address(), (address)x);
    ICache::invalidate_range(instruction_address(), instruction_size);
  }

  // Find and replace the oop/metadata corresponding to this
  // instruction in oops section.
  CodeBlob* cb = CodeCache::find_blob(instruction_address());
  nmethod* nm = cb->as_nmethod_or_null();
  if (nm != nullptr) {
    RelocIterator iter(nm, instruction_address(), next_instruction_address());
    while (iter.next()) {
      if (iter.type() == relocInfo::oop_type) {
        oop* oop_addr = iter.oop_reloc()->oop_addr();
        *oop_addr = cast_to_oop(x);
        break;
      } else if (iter.type() == relocInfo::metadata_type) {
        Metadata** metadata_addr = iter.metadata_reloc()->metadata_addr();
        *metadata_addr = (Metadata*)x;
        break;
      }
    }
  }
}

void NativeMovConstReg::print() {
  tty->print_cr(PTR_FORMAT ": mov reg, " INTPTR_FORMAT,
                p2i(instruction_address()), data());
}

//-------------------------------------------------------------------

int NativeMovRegMem::offset() const  {
  address pc = instruction_address();
  unsigned insn = *(unsigned*)pc;
  if (Instruction_aarch64::extract(insn, 28, 24) == 0b10000) {
    address addr = MacroAssembler::target_addr_for_insn(pc);
    return *addr;
  } else {
    return (int)(intptr_t)MacroAssembler::target_addr_for_insn(instruction_address());
  }
}

void NativeMovRegMem::set_offset(int x) {
  address pc = instruction_address();
  if (maybe_cpool_ref(pc)) {
    address addr = MacroAssembler::target_addr_for_insn(pc);
    *(int64_t*)addr = x;
  } else {
    MacroAssembler::pd_patch_instruction(pc, (address)intptr_t(x));
    ICache::invalidate_range(instruction_address(), instruction_size);
  }
}

void NativeMovRegMem::verify() {
#ifdef ASSERT
  MacroAssembler::target_addr_for_insn(instruction_address());
#endif
}

//--------------------------------------------------------------------------------

void NativeJump::verify() { ; }

address NativeJump::jump_destination() const          {
  address dest = MacroAssembler::target_addr_for_insn(instruction_address());

  // We use jump to self as the unresolved address which the inline
  // cache code (and relocs) know about
  // As a special case we also use sequence movptr(r,0); br(r);
  // i.e. jump to 0 when we need leave space for a wide immediate
  // load

  // return -1 if jump to self or to 0
  if ((dest == (address)this) || dest == nullptr) {
    dest = (address) -1;
  }
  return dest;
}

void NativeJump::set_jump_destination(address dest) {
  // We use jump to self as the unresolved address which the inline
  // cache code (and relocs) know about
  if (dest == (address) -1)
    dest = instruction_address();

  MacroAssembler::pd_patch_instruction(instruction_address(), dest);
  ICache::invalidate_range(instruction_address(), instruction_size);
};

//-------------------------------------------------------------------

address NativeGeneralJump::jump_destination() const {
  NativeMovConstReg* move = nativeMovConstReg_at(instruction_address());
  address dest = (address) move->data();

  // We use jump to self as the unresolved address which the inline
  // cache code (and relocs) know about
  // As a special case we also use jump to 0 when first generating
  // a general jump

  // return -1 if jump to self or to 0
  if ((dest == (address)this) || dest == nullptr) {
    dest = (address) -1;
  }
  return dest;
}

void NativeGeneralJump::set_jump_destination(address dest) {
  NativeMovConstReg* move = nativeMovConstReg_at(instruction_address());

  // We use jump to self as the unresolved address which the inline
  // cache code (and relocs) know about
  if (dest == (address) -1) {
    dest = instruction_address();
  }

  move->set_data((uintptr_t) dest);
};

//-------------------------------------------------------------------

bool NativeInstruction::is_safepoint_poll() {
  // a safepoint_poll is implemented in two steps as either
  //
  // adrp(reg, polling_page);
  // ldr(zr, [reg, #offset]);
  //
  // or
  //
  // mov(reg, polling_page);
  // ldr(zr, [reg, #offset]);
  //
  // or
  //
  // ldr(reg, [rthread, #offset]);
  // ldr(zr, [reg, #offset]);
  //
  // however, we cannot rely on the polling page address load always
  // directly preceding the read from the page. C1 does that but C2
  // has to do the load and read as two independent instruction
  // generation steps. that's because with a single macro sequence the
  // generic C2 code can only add the oop map before the mov/adrp and
  // the trap handler expects an oop map to be associated with the
  // load. with the load scheuled as a prior step the oop map goes
  // where it is needed.
  //
  // so all we can do here is check that marked instruction is a load
  // word to zr
  return is_ldrw_to_zr(address(this));
}

bool NativeInstruction::is_adrp_at(address instr) {
  unsigned insn = *(unsigned*)instr;
  return (Instruction_aarch64::extract(insn, 31, 24) & 0b10011111) == 0b10010000;
}

bool NativeInstruction::is_ldr_literal_at(address instr) {
  unsigned insn = *(unsigned*)instr;
  return (Instruction_aarch64::extract(insn, 29, 24) & 0b011011) == 0b00011000;
}

bool NativeInstruction::is_ldrw_to_zr(address instr) {
  unsigned insn = *(unsigned*)instr;
  return (Instruction_aarch64::extract(insn, 31, 22) == 0b1011100101 &&
          Instruction_aarch64::extract(insn, 4, 0) == 0b11111);
}

bool NativeInstruction::is_general_jump() {
  if (is_movz()) {
    NativeInstruction* inst1 = nativeInstruction_at(addr_at(instruction_size * 1));
    if (inst1->is_movk()) {
      NativeInstruction* inst2 = nativeInstruction_at(addr_at(instruction_size * 2));
      if (inst2->is_movk()) {
        NativeInstruction* inst3 = nativeInstruction_at(addr_at(instruction_size * 3));
        if (inst3->is_blr()) {
          return true;
        }
      }
    }
  }
  return false;
}

bool NativeInstruction::is_movz() {
  return Instruction_aarch64::extract(int_at(0), 30, 23) == 0b10100101;
}

bool NativeInstruction::is_movk() {
  return Instruction_aarch64::extract(int_at(0), 30, 23) == 0b11100101;
}

void NativeIllegalInstruction::insert(address code_pos) {
  *(juint*)code_pos = 0xd4bbd5a1; // dcps1 #0xdead
}

bool NativeInstruction::is_stop() {
  return uint_at(0) == 0xd4bbd5c1; // dcps1 #0xdeae
}

//-------------------------------------------------------------------

// MT-safe patching of a long jump instruction.
void NativeGeneralJump::replace_mt_safe(address instr_addr, address code_buffer) {
  ShouldNotCallThis();
}

address NativeCallTrampolineStub::destination(nmethod *nm) const {
  return ptr_at(data_offset);
}

void NativeCallTrampolineStub::set_destination(address new_destination) {
  set_ptr_at(data_offset, new_destination);
  OrderAccess::release();
}

#if INCLUDE_JVMCI
// Generate a trampoline for a branch to dest.  If there's no need for a
// trampoline, simply patch the call directly to dest.
void NativeCall::trampoline_jump(CodeBuffer &cbuf, address dest, JVMCI_TRAPS) {
  MacroAssembler a(&cbuf);

  if (!a.far_branches()) {
    // If not using far branches, patch this call directly to dest.
    set_destination(dest);
  } else if (!is_NativeCallTrampolineStub_at(instruction_address() + displacement())) {
    // If we want far branches and there isn't a trampoline stub, emit one.
    address stub = a.emit_trampoline_stub(instruction_address() - cbuf.insts()->start(), dest);
    if (stub == nullptr) {
      JVMCI_ERROR("could not emit trampoline stub - code cache is full");
    }
    // The relocation created while emitting the stub will ensure this
    // call instruction is subsequently patched to call the stub.
  } else {
    // Not sure how this can be happen but be defensive
    JVMCI_ERROR("single-use stub should not exist");
  }
}
#endif

void NativePostCallNop::make_deopt() {
  NativeDeoptInstruction::insert(addr_at(0));
}

bool NativePostCallNop::patch(int32_t oopmap_slot, int32_t cb_offset) {
  if (((oopmap_slot & 0xff) != oopmap_slot) || ((cb_offset & 0xffffff) != cb_offset)) {
    return false; // cannot encode
  }
  uint32_t data = ((uint32_t)oopmap_slot << 24) | cb_offset;
#ifdef ASSERT
  assert(data != 0, "must be");
  uint32_t insn1 = uint_at(4);
  uint32_t insn2 = uint_at(8);
  assert (is_movk_to_zr(insn1) && is_movk_to_zr(insn2), "must be");
#endif

  uint32_t lo = data & 0xffff;
  uint32_t hi = data >> 16;
  Instruction_aarch64::patch(addr_at(4), 20, 5, lo);
  Instruction_aarch64::patch(addr_at(8), 20, 5, hi);
  return true; // successfully encoded
}

void NativeDeoptInstruction::verify() {
}

// Inserts an undefined instruction at a given pc
void NativeDeoptInstruction::insert(address code_pos) {
  // 1 1 0 1 | 0 1 0 0 | 1 0 1 imm16 0 0 0 0 1
  // d       | 4       | a      | de | 0 | 0 |
  // 0xd4, 0x20, 0x00, 0x00
  uint32_t insn = 0xd4ade001;
  uint32_t *pos = (uint32_t *) code_pos;
  *pos = insn;
  /**code_pos = 0xd4;
  *(code_pos+1) = 0x60;
  *(code_pos+2) = 0x00;
  *(code_pos+3) = 0x00;*/
  ICache::invalidate_range(code_pos, 4);
}